| Project Updates |
|
| 123 Washington Street |
« back |
|
Daily Activities | Contact Info | FAQs | Links
|
The next incarnation of 123 Washington Street began in August 2005 when
 |
| 123 Washington, August 2008 |
the Moinian Group purchased the property. The developer, with the help of architects Gwathmey Siegel and contractor Tishman Construction, plans to erect a mixed-use hotel and condominium that will stand 57 stories tall and offer 400,000 square feet. It is slated to open in spring 2010.
The original 10-story building was irreparably damaged on September 11, 2001, and was deconstructed in 2005.
Locate this project on the Interactive Streetwork Map.
|
Daily Activities
|
|
*The following information was last updated on July 1, 2009.
- Superstructure is now up to floor 55; top out expected in July 2009
- Tower crane removal to take place by early August 2009 resulting in a full road closure of Washington Street
- Construction expected to be complete in March 2010
- Ongoing work has reduced traffic lanes on Washington Street and calls for a full sidewalk closures on Washington, Carlisle, and Albany Streets along the site's perimeter
- Gas service to be installed on Albany Street in July 2009
|
|
|
Contact Info
|
|
Contact the Moinian Group for more information about the construction of the new 123 Washington Street at (212) 808-4000.
For more information about the deconstruction of the original 123 Washington Street building and to learn more about its air monitoring plan, please visit the Environmental Protection Agency’s (EPA) website here. Contact community involvement coordinator Ben Barry at (212) 637-3675 or barry.benjamin@epa.gov for further details.
|
|
|
Frequently Asked Questions
|
|
Q:
|
What building formerly stood at 123 Washington Street?
|
|
A:
|
Like its neighbor, the former Deutsche Bank building at 130 Liberty Street, 123 Washington Street (4 Albany) became contaminated with potentially harmful particles such as asbestos and lead, as debris spread following the collapse of the World Trade Center, necessitating its deconstruction.
123 Washington Street's original owner, Deutsche Bank, hired a team of environmental consultant groups to monitor the building throughout the process. After developing a plan to safeguard the area from the potentially harmful materials, the PAL Environmental Safety Corporation began the first of two phases of the deconstruction process on December 27, 2004. During this initial, 12-week abatement phase, the building’s exterior was sealed and its entire contents removed.
Click here to learn more about this deconstruction in depth at the Environmental Protection Agency's website.
|
|
Q:
|
How was air quality monitored around the 123 Washington Street building during deconstruction?
|
|
A:
|
Ambient air monitors were placed on the sidewalks surrounding 123 Washington Street and on its roof. These monitors measured a variety of contaminants associated with World Trade Center dust and materials from the building itself.
|
|
Q:
|
Where can I find the EPA's air-monitoring reports?
|
|
A:
|
The EPA reported the findings of its 123 Washington Street air monitors weekly and published them through LowerManhattan.info here. The various spreadsheets logged a range of information, including collection time and location, sample volumes, analytical methods, and laboratory details. The materials measured in the reports included asbestos, dust, and quartz, as well as the following metals: barium, chromium, manganese, zinc, beryllium, copper, mercury, cadmium, lead, nickel, and antimony. An explanation of the air-monitoring plan is available on the EPA’s website for 123 Washington Street.
|
|
Q:
|
What safety measures were taken for the building's deconstruction?
|
|
A:
|
Work on the 130,000-square-foot building was done in two phases: abatement and demolition. In the first phase, Deutsche Bank’s construction team cleaned and sealed the building exterior in preparation for the decontamination of the interior. The interior abatement is being conducted under negative pressure -- essentially by creating a vacuum inside the building -- to ensure that any dust disturbed during the deconstruction process remains inside. The second phase was floor-by-floor demolition of the building exterior, using wet methods to suppress dust.
|
| |
|
Click here for answers to commonly asked construction questions. |
|
|
|
|
 |
|
|
 |
You must have Flash player 7 to view this content. Download flash now.
|
|
